Teclado con RFID para Velbus
Teclado antivandálico con tarjetas RFID para el control de acceso utilizando el sistema de domótica de Velbus
- apto para el uso con el sistema de domótica de Velbus
- soporte antivandálico (aleación de zinc) para el montaje en superficie
- panel frontal: acero inoxidable
- teclado retroiluminado (azul) con teclas de metal y duración regulable (encendido - 10 seg. - apagado)
- standby LED and 2 user channel status LEDs on the front
- built-in tamper detection
- weatherproof (IP65)
- 2 separate user channels with max. 1,000 users for controlling channel 1 and max. 100 users for channel 2
- 50 visitor codes for temporary workers and visitors, for one time use or which expire after a programmable time of 1-99 hours
- 4-8 digit user codes, RFID cards or fobs, or combination of the two for different security levels
- advanced possibilities using Velbus configuration:
- channel inhibition during certain periods and/or activated by Velbus buttons, sensors,...
- configure a Velbus button as egress button, for opening the door without using codes or cards (e.g. for a button inside the building)
- additional functionality using inputs/outputs that are not connected to the Velbus system (if needed these can be connected using Velbus input and output modules):
- input for sensing the door position: e.g. by directly connecting a normally closed magnetic door switch (used for warning beeps when the door remains open, advanced security access, )
- egress input: for opening the door without using codes or cards, eg. using a button inside the building directly wired to the keypad
- duress output: when entering the duress code, the user channels will be operated just like a normal code, but additionally the duress output (open collector) will be closed, eg. for triggering a silent alarm when someone is forced to operate the keypad
- alarm output (open collector): closes when the door is forced open or opened after the egress delay (configurable 1-99 seconds)
- compatible con: 125 kHz Manchester 64-bit EM4100 & EM4200 EM cards and keyfobs
- CAN terminator switch with state detection
- 8 Velbus channels: 2 user channels, tamper alarm, 5 virtual buttons
- uses one Velbus address (configurable in VelbusLink)
- extensive day, week and year programs plus a built-in astronomical clock (sunrise and sunset timing) are included to operate, lock and unlock the channels automatically (configurable in VelbusLink)
- alimentación
- 15 ±3 VDC
- peso
- 400 g
- consumo de corriente
- 130 mA max.
- carcasa
- die-cast zinc alloy protection bracket
- número de canales
- 8
- dimensiones (Al x L x P)
- 144 x 78 x 32 mm
- grado de protección
- IP65
- condiciones de funcionamiento
- -20 to +70°C
- condiciones de almacenaje
- -20 to +70°C. 5-95% relative humidity non-condensing
- Información
- mounting screws. wall plugs and 2 RFID cards included
- Velbus bus connector cross section (solid wire)
- 0.5 - 1.5 mm²
- delays for code entry and card reading
- 10 seconds max. delay for next digit entry. 30 seconds max. delay for code entry after card reading
- address range
- 1-250
- number of program steps
- 70 max.
- faceplate material
- acero inoxidable
- máx. potencia transmitida
- < -57 dBm